Tempo’s Aircraft Engine Enamel withstands the high heat (up to 500 degrees f.)demands of aircraft engines. The Urethane-Modified Alkyd Enamel has excellent heat, fuel and corrosion resistance. Bare aluminum or steel should be primed first with Zinc Phosphate Primer (A-701 Yellow, or A-702 Green) or Self Etch Primer (A-880 Gray).16 Oz
- Resin System: Urethane Modified Alkyd
- Dry Time: Tack Free 30 to 40 Minutes
- Fully Dry: 2 to 3 Hours
- Recoat: Within 4 Hours or after 36 Hours
- Resistance: Heat 500 Degrees F
- Abrasion Resistance, Good
- Adhesion, Good
- Corrosion Resistance, Excellent